Power Stabiliser 230V 10-kW Single Phase

Description

10kva stabilizer(SVC) Specifications:

1	Type		ADR
2	Capacity		10KVA
3	AC Input voltage	Switch	1P60A (Chint brand switch)
		Phase	Single Phase
		Voltage	176V-250V
		Frequency	50/60HZ
4	AC Output voltage	Phase	Three Phase
		Voltage	220V
		Frequency	50/60HZ
5	Rated output current		45A
6	Voltage Accuracy		±1-5%V Adjustable(Factory set±1%)
7	Load working		continuous no interrupt working keep 80% load
8	Efficiency		>98%
9	Insulation strength		2500V/Min
10	Insulation Class		H level
11	Cooling method		Natural cooling/ fan system cooling
12	Resist electric strengh		2500VAC/min
13	Noise		≤60db(Noclude forced air cooling system)
14	Temperature Rise		≤75℃
15	Size:		Length400 Width 320 High620(mm)
16	Weight :		Net weight:40KG
17	Environment	Ambient Temperature	-10~35℃
		Related humidity	15~85%(25℃)
		Altitude	<1500M
18	Warranty		2 years

19.Protection Function	Over/under voltage protection	When the input voltage exceeds the value of over/under voltage, the stabilizer will protect automatically
	Over current	When the current exceeds the rated value, automatically cut off the input
	Overload and short circuit protection	When the load exceeds the overload value or short circuit of the equipment, it can cut off the power supply within the specified time;
	Position Limitation Protection	When the brush is running over the area, automatically stop adjustment;
	Bypass Protection	When the voltage stabilizer needs maintenance or in failure, the switch can be switched manually in the power supply;
	Effective sampling circuit control	High accuracy, good sensitivity, frequency characteristic measurement, good rate, high input impedance, low output impedance, wide range and low power consumption power supply
	Circuit Function	When the sampling voltage is lower than the lower reference voltage or higher than the upper limit voltage, the brush will automatically return to the center;

There are no reviews yet.

Be the first to review “Power Stabiliser 230V 10-kW Single Phase”