Description
10kva stabilizer(SVC) Specifications:
| 1 | Type | ADR | |
| 2 | Capacity | 10KVA | |
| 3 | AC Input voltage | Switch | 1P60A (Chint brand switch) |
| Phase | Single Phase | ||
| Voltage | 176V-250V | ||
| Frequency | 50/60HZ | ||
| 4 | AC Output voltage | Phase | Three Phase |
| Voltage | 220V | ||
| Frequency | 50/60HZ | ||
| 5 | Rated output current | 45A | |
| 6 | Voltage Accuracy | ±1-5%V Adjustable(Factory set±1%) | |
| 7 | Load working | continuous no interrupt working keep 80% load | |
| 8 | Efficiency | >98% | |
| 9 | Insulation strength | 2500V/Min | |
| 10 | Insulation Class | H level | |
| 11 | Cooling method | Natural cooling/ fan system cooling | |
| 12 | Resist electric strengh | 2500VAC/min | |
| 13 | Noise | ≤60db(Noclude forced air cooling system) | |
| 14 | Temperature Rise | ≤75℃ | |
| 15 | Size: | Length400 *Width 320* High620(mm) | |
| 16 | Weight : | Net weight:40KG | |
| 17 |
Environment |
Ambient Temperature | -10~35℃ |
| Related humidity | 15~85%(25℃) | ||
| Altitude | <1500M | ||
| 18 | Warranty | 2 years | |
|
19.Protection Function
|
Over/under voltage protection |
When the input voltage exceeds the value of over/under voltage, the stabilizer will protect automatically |
|
Over current |
When the current exceeds the rated value, automatically cut off the input |
|
|
Overload and short circuit protection |
When the load exceeds the overload value or short circuit of the equipment, it can cut off the power supply within the specified time; |
|
|
Position Limitation Protection |
When the brush is running over the area, automatically stop adjustment; |
|
|
Bypass Protection |
When the voltage stabilizer needs maintenance or in failure, the switch can be switched manually in the power supply; |
|
|
Effective sampling circuit control |
High accuracy, good sensitivity, frequency characteristic measurement, good rate, high input impedance, low output impedance, wide range and low power consumption power supply | |
|
Circuit Function |
When the sampling voltage is lower than the lower reference voltage or higher than the upper limit voltage, the brush will automatically return to the center; |
Reviews
There are no reviews yet.